DEVELOPMENT OF A VIBRATORY HONEY EXTRACTOR

Abstract

Extraction of honey from honey comb is extracted predominantly using either traditional method or the mechanical screw press method which generates a problem of crushing the comb along with the extract. This creates an additional cost of separating unwanted materials in the extract. To solve this problem for stakeholders in the honey business worldwide, a vibratory honey extractor was conceived, designed and fabricate. The machine was made of stainless, mild steel and plastic materials. The machine has a capacity of 2.5 Kw and operates at speed and frequency of 483 rpm and 50 Hz respectively. The machine was able to attain an extract of 98.9% a value far better than the centrifugal method within 40 minutes of operation. A reduction to 0.21 of the initial weight of honey extraction was obtained at an average extraction rate of 7.36g /min. The honey extracted was good quality given the best acceptable value for all stakeholders in the honey business industries.